Manufacturer
Keencut
Product Code
SMLH
£184.92
(ex VAT £221.90 Inc. VAT)

Keencut Surface Mounted Lift & Hold Mechanism - Pack of 2

Simple - Effective

Mechanises lifting and prevents cutter from moving during operation so increases the effectiveness of clamping and improves performance.

 

The SMLH is the simplest way to integrate the Javelin Series 2 into a standard workbench as it affixes directly to an existing bench. The cutter slots on an off the mechanisms in seconds so the Javelin is always available to be used as a portable unit when needed.

 

Supplied as a set of two mechanisms – Left & Right

Designed to fit the Javelin Series 2 precision cutting bars, the Lift & Hold Mechanism is affixed to the table by screws, ultimately securing the cutter bar in place to prevent shifting while cutting. The device allows operators to easily lift the cutter bar, slide the material in place and clamp down to make precision cuts.

It is essential that the surface being used to cut on is flat, if the surface is dished at any point then the material being cut may not be held in position firmly and will move sideways as the blade passes giving a curved cut. This is particularly important if thin or flexible materials are being cut.

A narrow groove can be machined in the table surface for the tip of the blade to run in. Otherwise, we suggest using a cutting mat to protect the table surface and prevent the blade tip from being deflected while cutting.

Features:

Turn your table into a precision cutting station.

Improve the accuracy and function of the Max and Javelin Series 2 precision cutter bars.

5 year general warranty on all parts.

100% made in England.